Wiring in Tail Lights – Tour Pak

Wiring in Tail Lights – Tour Pak

I recently added a King Tour Pak to my Road Star. The Tour Pak didn’t have any lights so I added them myself. I purchased aftermarket tail lights and wired in  a couple LED light strips for the side marker lights.

I don’t like cutting the factory wires on the bike so whenever I add lights or accessories, I get power from my Auxiliary Fuse Box or create Y connectors. In this case I created a Y connector, since I needed to wire in the blinkers, tail and brake light. There is a connector under the seat that goes to the tail light, break light and rear blinkers. That is where I decided to get my signal.